HP XP P9000 Auto LUN User Guide (AV400-96606, January 2014)

Table 2 Candidates for source and target volumes by program product (continued)
Target Volume Candidate?Source Volume Candidate?Volume Type/StatusProgram Product
NoYes, if volumes are in SMPL
status
Deleted pair volumes from
MCU
NoYes, if volume is in SMPL
status
Deleted S-VOL from MCU
NoYes, if volume is in SMPL
status
Deleted P-VOL from RCU
NoYesA volume in suspended,
simplex, or duplex status
Continuous Access
Synchronous Z
NoYes, if volume is in suspended
status
An external M-VOL
NoYes, if volume is in simplex
status
An external R-VOL
NoYes. Note that the target
volume must be in the same
CLPR.
A data volume pairContinuous Access Journal
and Continuous Access
Journal Z
NoNoA journal volume
NoYes. Note that the target
volume must be in the same
CLPR.
A primary volume in any
status
Continuous Access Journal
NoYes. Note that the target
volume must be in the same
CLPR.
A secondary volume in PSUS
status
NoNoA volume in COPY or PAIR
status
NoYes. Note that the target
volume must be in the same
CLPR.
A primary volume in any
status
Continuous Access Journal
Z
NoYes. Note that the target
volume must be in the same
CLPR.
A secondary volume in
suspend status
NoNoA volume in Pending Duplex
or Duplex status
NoNoA normal volumeCompatible XRC
NoYesS-VOLCompatible FlashCopy and
Compatible FlashCopy SE
NoNoT-VOL
NoNoVirtual volumeSnapshot
NoNoPool volume
NoYes, if in PAIR statusP-VOL
NoNoS-VOL
NoYesA reserved BC volume
NoYesBC pair volumesBusiness Copy and
Business Copy Z
NoYesA P-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:1 or 1:2
12 Requirements