HP P9000 Auto LUN User Guide

Table 2 Candidates for Source and Target Volumes by Program Product (continued)
Target Volume Candidate?Source Volume Candidate?Volume Type/StatusProgram Product
NoYes, if volume is in SMPL
status
Deleted P-VOL from RCU
NoYesA volume in suspended,
simplex, or duplex status
Continuous Access
Synchronous Z
NoYes, if volume is in
suspended status
An external M-VOL
NoYes, if volume is in simplex
status
An external R-VOL
NoYes.
NOTE: The target volume
must be in the same CLPR.
A data volume pairContinuous Access Journal
and Continuous Access
Journal Z
NoNoA journal volume
NoYes.
NOTE: The target volume
must be in the same CLPR.
A primary volume in any
status
Continuous Access Journal
NoYes.
NOTE: The target volume
must be in the same CLPR.
A secondary volume in PSUS
status
NoNoA volume in COPY or PAIR
status
NoYes.
NOTE: The target volume
must be in the same CLPR.
A primary volume in any
status
Continuous Access Journal
Z
NoYes.
NOTE: The target volume
must be in the same CLPR.
A secondary volume in
suspend status
NoNoA volume in Pending Duplex
or Duplex status
Yes, but only if the volume is
in suspended status
NoA normal volumeCompatible XRC
NoYesS-VOLCompatible FlashCopy and
Compatible FlashCopy SE
NoNoT-VOL
NoNoA virtual volumeSnapshot
NoNoA pool volume
NoYesSS pair volumes
NoYes, if in PAIR statusP-VOL
NoNoS-VOL
NoYesBC pair volumesBusiness Copy and Business
Copy for Mainframe Z
NoYesA reserved BC volume
NoYesA P-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:1 or 1:2
12 Requirements