HP P9000 Auto LUN User Guide (AV400-96385, October 2011)

Figure 7 3DC multi-target configuration
Table 5 Pair status when P-VOL of Continuous Access Journal Z delta resync pair is as a source
volume
StatusPair Name
SUSPEND or DUPLEXContinuous Access Synchronous Z pair
Any pair status can be acceptableContinuous Access Journal Z pair
Hold or HldeContinuous Access Journal Z pair for delta resync operation
Table 6 Pair status when S-VOL of Continuous Access Journal Z delta resync pair is a source volume
StatusPair Name
Any pair status can be acceptableContinuous Access Synchronous Z pair
SUSPENDContinuous Access Journal Z pair
Hold or HldeContinuous Access Journal Z pair for delta resync operation
Also, the source and target volumes must belong to the same CLPR.
Auto LUN and Continuous Access Journal
You cannot select a volume in COPY or PAIR status as a source volume.
If you create a Continuous Access Journal pair for a delta resync operation in a 3DC multi-target
configuration, the primary volume or the secondary volume of the delta resync pair can be used
as a source volume. To use the primary or secondary volume as a source volume, you must ensure
that the status of each pair in the 3 DC multi-target configuration is as shown in Table 7 (page 16)
and Table 8 (page 16).
Also, the source and target volumes must belong to the same CLPR.
Auto LUN and Continuous Access Journal 15