HP P9000 Auto LUN User Guide (AV400-96385, October 2011)

Table 2 Candidates for Source and Target Volumes by Program Product (continued)
Target Volume Candidate?Source Volume Candidate?Volume Type/StatusProgram Product
NoYes.
NOTE: The target volume
must be in the same CLPR.
A secondary volume in
suspend status
NoNoA volume in Pending Duplex
or Duplex status
Yes, but only if the volume is
in suspended status
NoA normal volumeCompatible XRC
NoNoA virtual volumeSnapshot
NoNoA pool volume
NoYesSS pair volumes
NoYes, if in PAIR statusP-VOL
NoNoS-VOL
NoYesBC pair volumesBusiness Copy and Business
Copy for Mainframe
NoYesA reserved BC volume
NoYesA P-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:1 or 1:2
NoNoA P-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:3
NoYesAn S-VOL in an BC pair
where the P-VOL to S-VOL
ratio is 1:1, 1:2, or 1:3
NoYesA P-VOL in an L1 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:1 or 1:2
NoNoA P-VOL in an L1 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:3
NoYesA P-VOL in an L2 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:1
NoNoA P-VOL in an L2 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:2
NoYesAn S-VOL in an L1 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:1, 1:2, or
1:3
NoNoAn S-VOL in an L2 cascaded
BC pair where the P-VOL to
S-VOL ratio is 1:1 or 1:2
NoNoA volume in COPY (SP) or
PSUS (SP) status
Business Copy
NoNoA volume in SP-Pend or
V-Split status
Business Copy Z
12 Requirements