HP StorageWorks P9000 Mainframe Host Attachment and Operations Guide: P9500 Disk Array (AV400-96332, January 2011)

The following HCD steps correspond to the 2105 IOCP definition shown in the previous example.
IMPORTANT: The HCD PAV definitions must match the configurations in the storage system. If
not, error messages are issued when the Hosts are IPL'd or the devices are varied online.
1. From an ISPF/PDF primary options menu, select the HCD option to display the basic HCD
panel. On this panel you must verify the name of the IODF or IODF.WORK I/O definition file
to be used.
San Diego OS/390 R2.8 Master MENU
OPTION ===> HC SCROLL ===> PAGE
USERID - HDS
TIME - 20:23
IS ISMF - Interactive Storage Management Facility
P PDF - ISPF/Program Development Facility
IP IPCS - Interactive Problem Control Facility
R RACF - Resource Access Control Facility
SD SDSF - System Display and Search Facility
HC HCD - Hardware Configuration Definition
BMB BMR BLD - BookManager Build (Create Online Documentation)
BMR BMR READ - BookManager Read (Read Online Documentation)
BMI BMR INDX - BookManager Read (Create Bookshelf Index)
SM SMP/E - SMP/E Dialogs
IC ICSF - Integrated Cryptographic Service Facility
OS SUPPORT - OS/390 ISPF System Support Options
OU USER - OS/390 ISPF User Options
S SORT - DF/SORT Dialogs
X EXIT - Terminate ISPF using list/log defaults
F1=HELP F2=SPLIT F3=END F4=RETURN F5=RFIND F6=RCHANGE
F7=UP F8=DOWN F9=SWAP F10=LEFT F11=RIGHT F12=RETRIEVE
2. On the basic HCD panel, select the proper I/O definition file, and then select option 1 to
display the Define, Modify, or View Configuration Data panel.
OS/390 Release 5 HCD
Command ===> ________________________________________________________________
Hardware Configuration
Select one of the following.
1_ 1. Define, modify, or view configuration data
2. Activate or process configuration data
3. Print or compare configuration data
4. Create or view graphical configuration report
5. Migrate configuration data
6. Maintain I/O definition files
7. Query supported hardware and installed UIMs
8. Getting started with this dialog
9. What's new in this release
For options 1 to 5, specify the name of the IODF to be used.
I/O definition file . . . 'HDS.IODF06.WORK' +
.----------------------------------------------------------.
| (C) Copyright IBM Corp. 1990, 1998. All rights reserved. |
'----------------------------------------------------------'
F1=Help F2=Split F3=Exit F4=Prompt F9=Swap F12=Cancel
3. On the Define, Modify, or View Configuration Data panel, select option 4 to display the Control
Unit List panel.
OS/390 Release 5 HCD
.------------- Define, Modify, or View Configuration Data --------------. _
| |
| Select type of objects to define, modify, or view data. |
| |
| 4_ 1. Operating system configurations |
| consoles |
| system-defined generics |
| EDTs |
| esoterics |
| user-modified generics |
| 2. Switches |
| ports |
| switch configurations |
| port matrix |
| 3. Processors |
| partitions |
| channel paths |
| 4. Control units |
| 5. I/O devices |
| |
Mainframe hardware definition 23