HP XP7 Command View Advanced Edition System Requirements (TK981-96010, May 2014)

Storage systems requirements
Table 6-3 Prerequisite firmware versions and software products (for XP24000/XP20000)
Prerequisite firmware versions
Prerequisite software products
• Controller microcode to perform a quick format:
60-02-2x-xx/xx or later
•
Controller microcode to use the performance
information acquisition feature:
60-01-42-xx/xx or later
To use storage logical partitioning (SLPR) or cache
logical partitioning (CLPR):
•
XP Disk/Cache Partition
To use 3DC functionality:
•
Disaster Recovery Extended
• Controller microcode to use the function that links
XP Thin Provisioning Software and XP
Continuous Access Software, and the function
that links XP Thin Provisioning Software and XP
Continuous Access Journal:
60-02-4x-xx/xx or later
•
Controller microcode to use XP External Storage
Software for mapping external volumes to internal
volumes:
60-02-4x-xx/xx or later
•
Controller microcode to use XP External Storage
Software for removing the mapping between
external and internal volumes:
60-06-00-xx/xx or later
•
Controller microcode to manage storage systems
by using IPv6 addresses:
60-02-4x-xx/xx or later
•
Controller microcode to use 23 REC Command
Support as the host mode option
60-02-24-xx/xx or later
•
Controller microcode to use 48 ESAM Svol Read
Option as the host mode option
60-06-21-xx/xx or later
•
Controller microcode to use 49 BB Credit Set Up
Option1, 50 BB Credit Set Up Option2 or 51
Round Trip Set Up Option as the host mode
option
60-07-5x-xx/xx or later
•
Controller microcode to use when the Device
Manager server periodically checks changes in
the XP24000/XP20000 configuration:
60-04-10-xx/xx or later
To use the XP Thin Provisioning Software
functionality:
•
XP Thin Provisioning Software
1
From Device Manager, you can only check configuration information of copy pairs. You cannot change the
copy pair configuration.
NOTE: Do not use DHCP if you use Device Manager to manage the storage system.
95