HP XP7 Command View Advanced Edition System Requirements (TK981-96010, May 2014)

Device Manager agent requirements
Table 3-3 Supported operating systems (Windows, Solaris, HP-UX, and Linux)
OS Version Architecture IPv6
Environment
Support
7
Remarks
Legend
Y: Supported.
--: Not supported.
1
: If Windows Firewall has been enabled, the Device Manager agent must be registered as an exception with
Windows Firewall when a new installation of the Device Manager agent is performed.
2
: The Device Manager agent runs in the usual global environment (global zone) only. If a non-global zone has
been created, install the Device Manager agent in the global zone.
3
: Only the Sun Fire X series is supported. ( Ex. Sun Fire X4100 )
4
: The following library is required: glibc-2.5-18.el5_1.1 or later.
5
: The module of gdb-6.5-21.2 or later is necessary.
6
: The package of glibc-<RPM-package-version>.i686.rpm is necessary.
7
: Available version of RAID Manager is 01-21-03 or later.
8
: The following packages are required: kernel-2.6.32-220.4.2.el6.i686.rpm or later, kernel-firmware-2.6.32-
220.4.2.el6.noarch.rpm or later.
9
: The following packages are required: kernel-2.6.32-220.4.2.el6.x86_64.rpm or later, kernel-firmware-2.6.32-
220.4.2.el6.noarch.rpm or later.
10
: It provided as a guest OS of virtual server product Solaris LDoms 1.2 or 1.3 is also supported. To execute
P9000 CV AE on the virtual server, configure the virtual server as the recommended configuration written in
the manual.
Table 3-4 Supported operating systems (AIX)
Version Architecture Maintenance
Level/Technology
Level
IPv6 Environment
Support
1
Remarks
6.1 POWER (64 bit)
2
No ML
TL01 to 09
Y The Device Manager agent
does not support environments
where the Secure by Default
function is enabled.
7.1 POWER (64 bit) No ML
TL01
TL02(SP2 or later)
TL03
Y The Device Manager agent
does not support environments
where the Secure by Default
function is enabled.
Legend
Y: Supported.
--: Not supported.
1
: Available version of RAID Manager is 01-21-03 or later.
2
: It provided as a guest OS of virtual server product AIX VIO 2.1.1 is also supported. However, an HBA that
supports NPIV is required. To execute P9000 CV AE on the virtual server, configure the virtual server as the
recommended configuration written in the manual.
CAUTION:
The Device Manager agent only supports global addresses. You cannot use link-local
addresses or global unique local addresses (site-local addresses).
54