HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 System Requirements

Device Manager agent requirements
3 Device Manager agent requirements
This chapter provides the system requirements of the Device Manager agent.
•
CAUTION:
Before you connect the host with storage systems via FC-HUB (or FC-SWITCH),
confirm whether FC
-HUB (or FC-SWITCH) and its firmware are appropriate for the storage
system:
○ Check the corresponding HBA model. For details, see 3-1-2 .
○ Check the FC-HUB (and firmware) supported by the target storage systems. Refer to the appropriate
documentation for your storage system.
• Hardware requirements (section 3-1 )
• Software requirements (section 3-2 )
CAUTION:
Before you connect the host with storage systems via FC-HUB (or FC-SWITCH),
confirm whether FC
-HUB (or FC-SWITCH) and its firmware are appropriate for the storage
system:
○ Check the corresponding HBA model. For details, see 3-1-2 .
○ Check the FC-HUB (and firmware) supported by the target storage systems. Refer to the appropriate
documentation for your storage system.
3-1 Hardware requirements
The following table describes the computer requirements for Device Manager agent.
Table 3-1 Computer requirements for Device Manager Agent.
OS Installation destination Required disk
space
Remarks
Windows
1
For 32-bit (x86)
architecture
system-drive\Program Files
\HDVM\HbaseAgen
For 64-bit (IPF or x64)
architecture
system-drive\Program Files
(x86)\HDVM\HBaseAgent
180MB An additional 100 MB of temporary
free space is required for the
system drive during installation.
Solaris
/opt/HDVM/HBaseAgent
25MB
The temporary free space during
installations in /var/tmp directory
are also required.
New installation
30MB
Overwrite installation
80MB
/var/opt
5MB
AIX
/usr/HDVM/HBaseAgent
40MB
The temporary free space during