HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 Administrator Guide

DetailsAttributes
Specify whether to use the DNS server to look up the information about the
LDAP directory server.
If you want to directly specify information about the LDAP directory server in
the exauth.properties file, specify false.
If you want to use the DNS server to look up the information, specify true.
However, if the following attribute values are already set, the LDAP directory
server will be connected to by using the user-specified values instead of by
using the DNS server to look up the information.
• auth.group.domain-name.host
• auth.group.domain-name.port
Default value: false
dns_lookup
Note:
To specify the attributes, use the following syntax:
auth.radius.auth.server.name-property-value.attribute=value
Table 41 Setup items in the exauth.properties file for RADIUS authentication (when directly specifying
information about the external authorization server)
DetailsAttributes
Specify the protocol for connecting to the LDAP directory server.
When communicating in plain text format, specify ldap. When using StartTLS
communication, specify tls.
Before specifying tls, make sure that one of the following encryption methods
can be used on the LDAP directory server.
• TLS_RSA_WITH_AES_256_CBC_SHA
• TLS_RSA_WITH_AES_128_CBC_SHA
• SSL_RSA_WITH_3DES_EDE_CBC_SHA
Specifiable values: ldap or tls
Default value: ldap
protocol
#1
If the external authentication server and the external authorization server are running
on different computers, specify the host name or IP address of the LDAP directory
server. If you specify the host name, make sure beforehand that the host name can
be resolved to an IP address. If you specify the IP address, you can use either an
IPv4 or IPv6 address. When specifying an IPv6 address, enclose it in square
brackets ([]).
If you omit this attribute, the external authentication server and the external
authorization server are assumed to be running on the same computer.
Default value: none
host
#2
Specify the port number of the LDAP directory server. Make sure beforehand that
the port you specify is set as the listen port number on the LDAP directory server.
Specifiable values: 1 to 65535
Default value: 389
port
User account management138