HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 User Guide

TargetSourceVolume Type, State
NN
V-VOL
POOL
NNP-VOL
Fast Snap NNV-VOL
NNPOOL
YYRead/Write
Data Retention Util-
ity
5
NYVolumes other than the above
NYSuspended status
Volumes that are
configured for XRC
NNVolumes other than the above
NNVolumes for which virtual IDs are specified
Legend:
• Y: Can be selected
• N: Cannot be selected
• [ ]: Names indicated are those for mainframe-based programs
Notes:
1. When the migration source volume is a LUSE, a migration target must be selected for each volume that
constitutes the LUSE. Migration target volumes must also satisfy the following conditions:
• All of the migration target volumes are internal volumes, or all are external volumes.
• The I/O suppression mode, cache mode, and CLPR of all migration target volumes are the same.
• Migration target volumes are not THP/Smart volumes.
Also, for Tiered Storage Manager to automatically create pairs for migration sources and migration targets,
we recommend that the following conditions also be met:
• If the migration target volumes are external volumes, all of the volumes are in the same external storage
system.
• The RAID level, drive type, and SLPR (storage management logical partition) of all migration target
volumes are the same.
Note that if you are migrating a LUSE volume of an XP24000/XP20000 storage system for which the
micro version is earlier than 60-05-12-00/00, you must not perform I/O operations on the volumes while
migration is being executed.
2. The migration source volumes and migration target volumes or pools are in different THP/Smart pools.
3. The following conditions must be satisfied:
• The status is not blocked.
• The THP/Smart pool has more unused capacity than the migration source volumes.
• Used THP/Smart pool capacity does not exceed both used thresholds 1 and 2 (even after a migration
is performed).
• THP/Smart pool subscription does not exceed the subscription warning and subscription limit (even
after a migration is performed).
• The number of virtual volumes in the THP/Smart pool is less than the limit (HP P9500: 63,232;
XP24000/XP20000: 8,192).
4. The CLPRs for the migration target and migration source are the same.
5. If an external storage system is locked (not Read/Write), it cannot be a migration source or migration
target.
Operations in Legacy mode210