HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 CLI Reference Guide

DescriptionAttribute
Product name of the external volume
The product name might not be the same as the product name of the storage
system.
productName
Vendor name of the external volume
vendor
Display name of the device number of the internal volume to which the external
volume is mapped
For P9500 or XP24000/XP20000:
The value is output in the ww:xx:yy format, where ww is the logical DKC
number, xx is the CU number, and yy is the LDEV number.
For XP12000/XP10000/SVS200 or XP1024/XP128:
The value is output in the xx:yy format, where xx is the CU number and yy
is the LDEV number.
displayMappedDevNum
Display name of the external volume device number
The output format is the same as displayMappedDevNum.
displayExtern-
alDevNum
VPort instance
Commands for which a VPort instance is output
• GetStorageArray (subtarget=Port) , page 185
• GetStorageArray (subtarget=VResourcePartitionUnit), page 195
Table 161 VPort instance attributes
DescriptionAttribute
Object ID of the VPortobjectID
ID of the resource group to which the virtualized resources belong
The ID of the resource group used for data migration using virtual IDs is output.
resourceParti-
tionUnitID
Port ID
portID
Family of the virtual storage system
vArrayFamily
Serial number of the virtual storage system
vSerialNumber
Virtual port ID of the port
If there is no virtual information for the port, -1 is output.
vPortID
Virtual port name of the port
vPortName
Virtual WWN of the port
vWWPortName
Virtual address of the Fibre port (AL_PA)
• 00 or no value: Neither a Fibre port nor an FCoE port.
• 01 to EF: Valid address (two-digit hexadecimal number)
vFibreAddress
Output items416