HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 Administrator Guide (Web Version)

System configuration for using an SVP configuration to manage copy pairs (when copy pairs
are defined in a configuration definition file)
Set up the management server, pair management server, and storage system so that the prerequisites
are satisfied.
Figure 21 Example of a system configuration for managing copy pairs (when copy pairs are defined
in a configuration definition file)
Management server conditions:
The following computers must be registered as the Device Manager management resources:
• A host that recognizes the P-VOL
• A host that recognizes the S-VOL
Pair management server conditions:
• Device Manager agent version 7.1 or later must be installed on the pair management server.
• RAID Manager version 01-25-03/01 or later must be installed on the pair management
server.
Copy pair (P-VOL and S-VOL) conditions:
• The P-VOL and S-VOL must be managed by a single management server (Device Manager
server).
• From the P-VOL and S-VOL, LUN security must be set for the host (application server).
The management server does not need to recognize the P-VOL or S-VOL.
• The P-VOL and S-VOL must be recognized by the hosts (application servers).
HP recommends that P-VOL and S-VOL be assigned to separate application servers.
Administrator Guide (Web Version) 61