HP XP P9000 Command View Advanced Edition Suite Software 7.6.0-00 Administrator Guide (Web Version)

CAUTION:
Do not specify HORCM_LDEV in an environment where RAID Manager 01-17-03/04 or later is not
installed. If you do this, the message An attempt to create a pair has failed. Error
detail, host "host-name" : "error-detail" is displayed, and the attempt to create pairs
fails.
server.agent.rm.userAuthentication
Specify whether to check that the authentication mode for command devices is enabled.
Specify true to check that the authentication mode for command devices is enabled. Specify false
if you do not want to do so.
Default:true
CAUTION:
If you specify false, make sure that no command devices whose authentication mode is enabled
are connected to the host where the Device Manager agent is installed. If you specify false when
the authentication mode for command devices is enabled, you cannot obtain the pair status or perform
pair operations properly.
server.agent.rm.ignorePairStatus
Specify whether to omit copy pair information when sending host information from the Device Manager
agent to the management server.
Specify true to omit copy pair information. Specify false if you do not want to omit the information.
In the following environments, make sure that you always specify true:
• Virtual machine for which a copy pair is assigned
• An SVP is used as a virtual command device to manage copy pairs defined as a device group.
When P-VOLs and S-VOLs are assigned to the management server, this property must be specified.
Default: false
server.agent.rm.horcmSource
If the RAID Manager configuration definition file is stored in a location other than the default, use the
absolute path to specify the storage location of the configuration definition file.
Specify the path according the following rules:
• In Windows, use a forward slash (/) as a path delimiter.
• In Windows, if a space is included in the path, you do not need to enclose the path with quotation
marks (").
• Do not use symbolic links.
Default: None
#
#: If you do not specify a path, the path for the following default storage location is used:
Device Manager agent properties410