HP StorageWorks XP24000 Remote Web Console Error Codes, v01 (AE131-96004, June 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
The threshold of pool cannot
be
changed when:
• the
threshold is set
below the usage rate of
the
pool.
When the pool cannot be
deleted, do the following:
•
check the installation
status of the V-VOL
management area,
when the V-VOL
management area is
not
initialized.
•
check the installation
status of the V-VOL
management area,
when the V-VOL
management area is
not
installed.
•
delete the XP Snapshot
pair if it still remains in
the
pool.
•
delete the XP Snapshot
pair if P-VOL still remains
in
the pool.
•
check the status of the
pool
when the pool is
blocked.
3005
584
73
An error occurred when
setting the Pool. Check the
er
ror message of the logical
vo
lume(s)
in the Pool.
Check the error message of
the
logical volume(s) in the
Pool.
E
6
3005
58474
The capacity of shared
memory is insufficient or an
error occurred during SVP
processing.
Please check the amount
of free space in Pool
management block in the
Pool window. Please install
additional shared memory if
thefreespace is insufficient.
Please call technical support
if the
capacity of shared
memory is not insufficient.
E
6
3005
58475
The PCB for fibre port or
iSCSI port is not installed.
Install the PCB for fiber port
or
iSCSI port and retry the
operation.
E
6
3005
58491
A communication time-out
error occurred in the storage
system. Please wait for a
while, and then retry the
operation.
If this problem persists, call
technical supp ort.
E
3
3005 5857 0
V-VOL management area is
being used.
Delete the
XP Snapshot
pair(s), then retry the
operation.
Delete the XP Snapshot
pair(s), then retry the
operation.
E
6
3005 58571
The specified operation
cannot
be executed because
the
Pool-VOL is not mounted.
Please check the Po ol-VOL
setting.
E
6
140
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes