HP StorageWorks XP24000 Disk/Cache Partition User's Guide, v01 (T5214-96004, June 2007)

• In the following cases, the licensed capacity allocated to all the SLPRs will be initialized, and the
program product of that license changes its status to Capacity Insufficient.
• Since the license expires, the licensed capacity for the corresponding program product
becomes insufficient.
• You re-install the program product with limited licensed capacity, which previously had the
unlimitedlicensedcapacity.
In
these cases, re-install the program product to each SLPR within 30 days.
Note: When the license expires with the licensed capacity being insufficient, the license changes
itsstatusto Not Enough.
The storage administrator can partition the licensed capacity from the License Key Partition Definition
window. Following subsections describe the License Key Partition Definition window and the procedure
of
partitioning and allocating licensed capacity.
From the License Key Partition Definition window (see Figure 5 on page 24), storage administrators can
partition the licensed capacity for SLPRs. On the License Key Partition Definition window, the progra m
product options for which the licensed capacity can be partitioned are listed.
The program product options have to be installed from the License Key window before the licensed
capacity for them are partitioned.
To open the License Key Partition D efinition window, click Go, Environmental Settings, and then License
Key Partition Definition on the menu bar of the Remote Web Console main window.
Figu
re 5 The License Key Partition Definition Win dow
The L
icense Key Partition Definition window consists of the following parts.
At th
e
upper part of the License Key Partition Definition window, the program product list is displayed (see
Figu
re 6 on page 25). The program product list includes the program products for which the licensed
capacity c an be allocated to SLPRs.
24
Using
the Disk/Cache Partition GUI