HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Parameters
Table 18 Parameters of the CreateStorageTier command
DetailsParameter
Specify the name of the storage domain.
storagedomain-
name
Specify the name of the storage tier to be created.
This name should be unique within the storage domain.
name
Specify the type of the storage tier to be created. If you omit this, the condition specified
in the filtercondition parameter will be used.
• Volume: Filter volumes.
• Pool: Filter pools.
[resource]
Specify a filter condition.
Depending on the management target, specify either of the following filter condition
expressions accordingly:
• For a managed volume, see Table 5 and Table 8.
Note that some properties might not be specifiable as filter conditions that are used
to filter volumes managed in storage tiers.
• For a managed pool, see Table 6 and Table 9.
filtercondi-
tion
Specify a description of the storage tier.
[description]
Specify the cost of normal volumes by using the following format:
currency-code amount / unit-of-capacity / period
•
currency-code
#
Specify a currency code conforming to ISO4217 using upper-case characters.
• amount
Specify an integer from 0 to 9223372036854775807. Do not use commas or
periods.
• unit-of-capacity
Specify MB, GB, or TB.
• period
Specify either Month or Year.
By specifying how much a set amount (capacity) of storage in a storage tier costs for a
set time period, you can operate storage with an awareness of costs. Tiered Storage
Manager software enables you to specify such cost, time period, and charge-target
information. You can freely specify the cost to match the provided services and their
charge system.
This parameter can be specified only if the storage tier is specified using volume filter
conditions.
When specifying this parameter, also specify the chargefor parameter.
[cost]
Details of CLI commands66