HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

DescriptionItem
The LDEV number of the LU in the storage system that stores the actual data.
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:).
subsystemDeviceNum-
ber
The device ID of the LU in the storage system that stores the actual data.
For the HP storage system, - is displayed.
subsystemDeviceID
The serial number of the storage system that stores the actual data.
subsystemSerialNum-
ber
The display name for the model of the storage system that stores the actual data.
If the display model name is unknown, the product name is displayed.
subsystemDisplay-
Model
The name of the storage system that stores the actual data.
If the storage system name is unknown, the product name and serial number are
displayed.
subsystemName
The vendor name of the storage system that stores the actual data.
subsystemVendor
The parity group number of the LU in the storage system that stores the actual data.
arrayGroupNumber
The parity group name of the LU in the storage system that stores the actual data.
arrayGroupName
The parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupBusyRate
The maximum parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupMaxBusyR-
ate
NOTE:
Unknown is output for some output items when volume information for the domain controller or
information regarding an externally connected storage cannot be obtained.
Example and execution results
• Command execution example (1):
In this example, detailed information is obtained for the volumes belonging to the MyStorageTier
storage tier of the MegaTechXP12000-Primary storage domain.
htsmcli GetVolumes --detail storagedomainname="MegaTechXP12000-Primary"
storagetiername="MyStorageTier"
• Execution results (1):
RESPONSE:
An instance of StorageDomain(1 of 1)
name=MegaTechXP12000-Primary
List of 2 LogicalUnit elements:
CLI Reference Guide 191