HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

DescriptionItem
The name of the storage system that stores the actual data.
If the storage system name is unknown, the product name and serial number are
displayed.
[subsystemName]
The vendor name of the storage system that stores the actual data.
subsystemVendor
The name of the migration group to which the volume belongs
migrationGroupName
The emulation type
emulationType
The CVS volume attribute of the volume.
This can be either Yes or No.
[CVS]
The capacity of the volume (units: KB).
If the volume type is normal or pool, the physical capacity is displayed. If the
volume type is virtual, the virtual capacity is displayed.
capacityInKB
The used capacity of the volume (units: KB).
If the volume type is normal, the capacity of the normal volume is displayed. If the
volume type is virtual, the used capacity of the virtual volume is displayed. If the
volume type is pool, nothing is displayed.
consumedCapa-
cityInKB
The ratio (percentage) of consumedCapacityInKB to capacityInKB. If the
volume type is pool, nothing is displayed.
consumedCapacity-
Percentage
The RAID level
RAIDLevel
The drive type
diskType
Drive speed (rpm)
- is displayed if SSD is specified for DiskType.
[diskRPM]
Indicates whether the parity group is encrypted. This can be any of the following:
• Enabled: The parity group is encrypted.
• Disabled: The parity group is not encrypted.
• -: Indicates a THP volume, V-VOL, or LUSE volume. Alternatively, the encryption
feature is not supported.
[encryption]
The drive capacity (units: GB)
[diskCapacityInGB]
The parity group number of the LU in the storage system that stores the actual data.
[arrayGroupNumber]
The parity group name of the LU in the domain controller
controllerArray-
GroupName
The parity group name of the LU in the storage system that stores the actual data.
arrayGroupName
The parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupBusyRate
The maximum parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupMaxBusyR-
ate
CLI Reference Guide 187