HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

Options
-d or --detail
Specify this to display detailed information in the standard output after CLI command execution.
If you omit this option, only summary information will be displayed.
Parameters
Table 86 Parameters of the GetVolumes command
DetailsParameter
Specify the name of the storage domain.
storagedomainname
Specify the name of a storage tier.
Note that this cannot be specified when migrationgroupname is specified.
[storagetiername]
Specify the name of a migration group.
Note that this cannot be specified when storagetiername is specified.
[migrationgroup-
name]
Specify a filter condition.
For details on the specifiable properties, see Table 5 and Table 8.
If this is omitted, no filter condition is used to narrow down the search.
[filtercondition]
Legend:
[ ]: Specifying this parameter is optional.
Output items
Table 87 Items output by the GetVolumes command (StorageDomain instance)
DescriptionItem
The name of the storage domain
name
Table 88 Items output by the GetVolumes command (LogicalUnit instance)
DescriptionItem
The controller LDEV number. For a LUSE volume, this is an LDEV number of a
representative LDEV.
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
Label specified for a representative LDEV.
If no label is specified for the LDEV, nothing is displayed.
label
The serial number of the storage system that stores the actual data.
[subsystemSerialNum-
ber]
The display name for the model of the storage system that stores the actual data.
If the display model name is unknown, the product name is displayed.
[subsystemDisplay-
Model]
Details of CLI commands186