HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

#Example plan for migration
plan-type=Migration
format-version=1.0
storageDomainName=MegaTechXP12000-Primary
migrationGroupName=MG011
targetStorageTierName=MegaTech-HighCost
permitCrossSLPRMigration=No
permitCrossCLPRMigration=Yes
# arrayGroupSelectionRule=MinimumCoverage
# arrayGroupAvoidanceOfMigrationGroups=MG012,MG013
# Begin Profile Information
# List of 1 Profile elements:
# An instance of Profile(1 of 2)
# configuration=Open-V,4.97GB
# numberOfNeededVolumes=2
# numberOfAvailableVolumes=20(20)
# numberOfDifference=18(18)
# An instance of Profile(2 of 2)
# configuration=Open-9, 9GB, CVS
# numberOfNeededVolumes=5
# numberOfAvailableVolumes=3(3)
# numberOfDifference=-2(-2)
# End Profile Information
pair
# LUSE=No
# LU=0:E7
# emulationType=OPEN-9
# CVS=No
# capacityInKB=7,211,520
# LBA=14,423,040
# SLPRNumber=0
# CLPRNumber=0
# cacheMode=Disable
# IOSuppressionMode=Disable
sourceControllerDeviceNumber=0:E7
targetControllerDeviceNumber=
targetPoolId=THP 1
• Command execution example (6):
In this example, the CreateMigrationPlan command is executed on MegaTechXP12000-
Primary, which is a storage domain that requires a refresh:
htsmcli CreateMigrationPlan storagedomainname="MegaTechXP12000-Primary"
migrationgroupname="MG011" targetstoragetiername="MegaTech-HighCost"
• Execution results (6):
The KATS50209-E and KATS50906-E messages are output.
CLI Reference Guide 117