HP StorageWorks P9000 Tiered Storage Manager Software 7.1 CLI Reference Guide (TB585-96011, May 2011)

The output items described in Table 42 are displayed between the # Begin Profile Information
and # End Profile Information lines as comments.
Table 42 Items output by the CreateMigrationPlan command (migration profile information)
DescriptionItem
The item used to group volumes together by their emulation type, capacity
#1
, and
CVS attribute
#2
(configuration).
These items are separated by a comma and single-byte space.
configuration
The number of volumes necessary for executing a migration task, from among the
volumes grouped in configuration within the storage tier
numberOfNeeded-
Volumes
The number of volumes that can be used to execute a migration task, from among
the volumes grouped in configuration within the storage tier.
The number enclosed in parentheses indicates the number of volumes with the same
capacity as the migration source volume.
numberOfAvailable-
Volumes
The number obtained by subtracting numberOfNeededVolumes from
numberOfAvailableVolumes.
The number enclosed in parentheses indicates the number obtained by subtracting
the number of volumes in numberOfNeededVolumes from the number in
parentheses in numberOfAvailableVolumes.
numberOfDiffer-
ence
#1
The value in KB is displayed in parentheses in addition to the value in TB, GB, MB, or KB. The
value is displayed to two decimal places for TB or GB and as an integer for MB or KB.
#2
When the emulation type is OPEN-V, the CVS attribute is not displayed. When the emulation
type is other than OPEN-V and the LDEV type is the CSV attribute, CVS is displayed. When the
emulation type is not OPEN-V and the LDEV type is not the CSV attribute, nonCVS is displayed.
Table 43 Items output by the CreateMigrationPlan command (information about each volume pair to
be migrated)
DescriptionItem
The symbol indicating the start of specification for a migration source volume and
migration target volume
pair
The LUSE attribute
[ LUSE ]
The LU device number
[ LU ]
The emulation type
[ emulationType ]
The CVS volume attribute of the volume
This can be either Yes or No.
[ CVS ]
The capacity of the volume (units: KB)
[ capacityInKB ]
The volume capacity in blocks
[ LBA ]
The SLPR number
[ SLPRNumber ]
Details of CLI commands106