HP StorageWorks P9000 Replication Manager Software 7.1.1 Configuration Guide (TB584-96029, September 2011)

Prerequisite pro-

grams

Windows operating system

Windows Server 2008 R2 no SP or SP1

• Runs in the 32-bit emulation mode

Supports IPv4 and IPv6 connections

• Also runs as a guest OS of Windows Server 2008 Hyper-V and V2

• Also runs under VMware ESX/ESXi Server 3.x and 4.x

• Operation on Server Core is not supported

Windows 7 no SP or SP1

• x86 architecture only

• Supports IPv4 and IPv6 connections

• Also runs under VMware ESX/ESXi Server 3.x and 4.x

NOTE:

If you link to a Device Manager Agent running on a guest OS of VMware ESX 4.x or VMware ESXi

4.x, use version 7.0.1 or later of Device Manager server and Device Manager Agent.

The following table lists the server specifications required for a Linux environment.

NOTE:

To implement linkage to Device Manager Agent running on a guest OS of VMware ESX 4.x or VMware

ESXi 4.x, use version 7.0.1 or later of both Device Manager server and Device Manager agent.

The following table lists the server specifications required for a cluster environment.

Table 8 Requirements for a cluster environment

Cluster softwareOperating system

Microsoft Cluster Service

• Microsoft Windows Server 2003, Enterprise Edition

SP2

• Microsoft Windows Server 2003 R2, Enterprise

Edition SP2

Windows

(x86 only)

Microsoft Failover Cluster

• Microsoft Windows Server 2008 Enterprise Edition

SP2

VERITAS Cluster Server 4.1 MP2 and

5.0 MP1 or Sun Cluster 3.1

Solaris 10 SPARC (32-bit or 64-bit kernel mode)

Solaris 10 AMD64 (32-bit or 64-bit kernel mode)

Solaris 10

NOTE:

There is no no cluster support on Windows XP.

Configuration Guide 29