HP StorageWorks P9000 Replication Manager Software 7.1 Configuration Guide (TB584-96022, May 2011)

these values. To change the values, you need expert knowledge of Application Agent. The following
table describes the available properties and settings.
Table 37 List of properties in the appagentif.properties File
DescriptionProperty
The amount of time Replication Manager waits to connect to an Application
Agent when collecting configuration statuses. If 0 is specified, Replication
Manager waits until a connection is established without timing out.
Specifiable values: 0 to 3600 (seconds)
Default value: 30
appagentif.connect-
Timeout
The amount of time Replication Manager waits to receive a response from an
Application Agent when collecting configuration statuses. If 0 is specified,
Replication Manager waits for a response without timing out. If the specified
value exceeds the maximum, the default value is used.
Specifiable values: 0 to 86400 (seconds)
Default value: 3600
appagentif.response-
Timeout
Properties in the base.properties file
The base.properties file is used to specify the values of properties necessary for the internal
processing of Replication Manager. The following table describes the available properties and settings.
Table 38 List of properties in the base.properties File
DescriptionProperty
Specifies whether Replication Manager automatically synchronizes with a Device
Manager database. A value of true means that automatic synchronization
occurs, and a value of false means that it does not.
Specifiable values: true or false
Default value: true
base.repositry.syn-
chronize.polling
The interval at which Replication Manager checks whether a task related to a
copy pair operation has finished.
Specifiable values: 30 to 3600 (seconds)
Default value: 120
base.taskscheck.in-
terval
The maximum number of times that Replication Manager checks whether a task
related to a copy pair operation has finished. If 0 is specified, there is no limit.
Specifiable values: 0 to 100 (times)
Default value: 0
base.taskscheck.max-
count
The interval at which Replication Manager checks whether a task related to a
mainframe copy pair operation has finished.
Specifiable values: 30 to 3600 (seconds)
Default value: 120
base.taskscheck.mf.in-
terval
Operating the management server80