HP StorageWorks P9000 Replication Manager Software 7.1 Configuration Guide (TB584-96022, May 2011)

For Windows 64-bit edition:
%ProgramFiles(x86)%\HDVM\HBaseAgent\
If Device Manager Agent is pre-installed separately,
Common-Agent-Component-installation-folder is defined as follows:
folder-specified-by-HDvM-Agent-installer\HBaseAgent
NOTE:
When using Device Manager Agent on VMware 4.x, it is necessary to confirm the prerequisite
combination of Device manager server and Device Manager Agent. Even if you confirm and use a
prerequisite combination of Device Manager and Device Manager Agent, note the following:
• If the target volume is set as a command device on the virtual machine, by using Add CMD
Devices, the virtualization server needs to be restarted to recognize the command device.
Application Agent installation path restrictions
Make sure the paths used in the installation of Application Agent meet the following requirements:
• For the download destination path, the installation path for Application Agent, and the path spe-
cified in the environment variable %TMP%, do not use a directory name that starts or ends with
one or more spaces.
• For the path specified in the environment variable %TMP%, do not use a directory name that includes
the following characters:
% ` & ^ ;
• For the download destination path for Application Agent, do not use a directory name that includes
the following characters:
% `
• The installation path must be an absolute path consisting of 124 bytes or less (subject to program
restrictions).
If you plan to install Application Agent on the management
server
If you plan to install Application Agent on the management server, you must first do the following:
If Replication Manager is already installed on the management server:
1. Set the value of base.refreshdginfo.exec in the base.properties file to 0.
2. Refresh the configuration.
3. Install Application Agent on the management server.
If Application Agent is already installed on the management server:
1. Install Replication Manager on the management server.
2. Set the value of base.refreshdginfo.exec in the base.properties file to 0.
3. Refresh the configuration.
Setting up Application Agent60