HP StorageWorks P9000 Replication Manager Software 7.1 Configuration Guide (TB584-96022, May 2011)

NOTE:
This procedure assumes that the HP StorageWorks P9000 Command View AE Common Component
service is already running.
Procedure on the executing node
1. On the executing node, make sure that the HP StorageWorks P9000 Command View AE Common
Component service is online, and that the executing node currently owns the service and shared
disk.
2. From the Start menu, choose Settings, Control Panel, Administrative Tools, and then Cluster
Administrator. In the Cluster Administrator window that opens, place the following services offline:
• DeviceManagerServer
• HBase Storage Mgmt Web Service
• HBase Storage Mgmt Common Service
NOTE:
Do not place the shared disk resource offline.
If you place this offline, migration of the database will fail.
3. Execute the following command to stop the HP StorageWorks P9000 Command View AE Common
Component service:
installation-folder-for-P9000-Command-View-AE-Common-Component\bin\hcmdssrv
/stop
4. In the Cluster Administrator window, place the following service offline:
HiRDB/ClusterService _HD0
5. (Perform this step for each service in steps 2 and 4.) In the Cluster Administrator window, right-click
the service, and choose Properties. In the window that opens, choose the Advanced tab, select
Do not restart, and click OK.
Troubleshooting106