HP StorageWorks P9000 Replication Manager Software 7.1 CLI Reference Guide (TB584-96021, May 2011)

-pf copy-parameter-definition-file
Specify this option to use the number of retries and the retry interval defined in the copy parameter
definition file. Specify the copy-parameter-definition-file parameter as a file name only;
do not specify the parameter as a path.
If you omit this option, the value in the RAID Manager-linkage definition file (DEFAULT.dat) is used.
The values in DEFAULT.dat are used for any parameters that are not included in the copy parameter
definition file.
You can create a copy parameter definition file by using a name of your choice. Specify the file name
by using an alphanumeric character string that is 64 bytes or less. You must save the copy parameter
definition file to the following location:
Application-Agent-installation-directory\DRM\conf\raid
Return Values
0: Normal termination
Any value other than 0: Termination with an error
Conditions Causing an Error
This extended command fails in the following cases:
• An invalid option is specified.
• The system cannot acquire information from the operation definition file linked to the operation
ID.
• Information cannot be acquired from the backup ID file (when no copy group is specified).
• Information cannot be acquired from the copy-group list file (when the file is specified).
• An invalid copy track size is specified.
• A command executed inside the extended command encounters an error.
• The acquisition of the result of a command executed inside the extended command fails.
• Information cannot be acquired from the host environment settings file.
• No storage directory for extended-command temporary files is specified in the operation definition
file.
• The command fails to obtain the name of the directory where dictionary map files are stored.
Examples
• In this example, the extended command is used to resynchronize the pair volume of the copy
group CG001,dev01:
EX_DRM_RESYNC operation01 -cg CG001,dev01
• In this example, the extended command is used to resynchronize the pair volumes of the copy
group specified in the list file C:\temp\CGLIST.txt in batch mode:
EX_DRM_RESYNC operation01 -cg_file C:\temp\CGLIST.txt
• In this example, the extended command is used to resynchronize the pair volume of the copy
group corresponding to the backup ID recorded in the backup ID file:
CLI Reference Guide 35