HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

• “RefreshVirtualizationServer” on page 243
Table 116 Host instance attributes
DescriptionAttribute
Object ID of the host
objectID
Host name
If EXSP_xxxx_xxxx_xxxx is output as this value, the value indicates an
XP12000/XP10000/SVS200 port connected to an external storage system.
name
ID of the host
hostID
IPv4 IP address of the host
ipAddress
IPv6 IP address of the host
ipv6Address
Size of the LDEV allocated to the host (in KB)
For mainframe hosts, the value output for this attribute is 0.
capacityInKB
Host type
• -1: Normal host
• 1: External port
• 2: Mainframe host
• 3: Virtualization server (VMware ESX or VMware ESXi)
hostType
Mainframe host sysplexID
sysplexID
Status of the processing to update the Device Manager database
If the value of hostType is -1 or 3, one of the following values is output:
• 0: The Device Manager database is consistent.
• 1: The Device Manager database is being updated.
• 2: The Device Manager database is inconsistent. Use the AddHostRefresh
command or RefreshVirtualizationServer command to refresh the
information.
For other values of hostType, -1 is output.
statusOfDBUpdating
Virtualization software name and version
This item is output if the value of hostType is 3.
virtualization-
ServerVersion
HostInfo instance
The HostInfo instance is output when the following commands are executed:
• “AddHostInfo” on page 214
• “GetHost” on page 223
• “GetHostInfo” on page 232
• “GetStorageArray (subtarget=LogicalUnit) ” on page 134
• “GetStorageArray (subtarget=Path) ” on page 143
CLI Reference Guide 293