HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

5 Output items
This chapter describes items that are output by Device Manager CLI commands. The items are output
for each instance as attributes of Device Manager instances. The meaning of items that have the same
name might differ for different instances. When you reference an output item, check the instance of
the item.
Alert instance
The Alert instance is output when the GetAlerts command (see “GetAlerts” on page 247) is
executed.
Table 105 Alert instance attributes
DescriptionAttribute
Alert number
number
Alert type
• Server: Device Manager server
• Trap: SNMP trap from the storage system
type
Alert source
The object ID of the storage system is output.
source
Alert severity
• 0: Unknown
• 1: No Error
• 2: Acute
• 3: Serious
• 4: Moderate
• 5: Service
severity
Component where the alert occurred
For details about the component, see the attribute name of the instance
Component.
component
Alert description (example: Serious error detected on DKU drive.)description
Action to be taken for the alert (example: Contact Customer Support.)actionToTake
Data required to analyze the alert
When the value of type is Trap, the SIM data required by the customer service
is output.
data
Time at which the alert occurred (example: 2008/04/06 20:13:56)timeOfAlert
CLI Reference Guide 283