HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

domainnickname: Obtain this value from the execution result of the GetStorageArray
(subtarget=HostStorageDomain) command. Execute this command by specifying only the model
and serialnum parameters, and HostStorageDomain for the subtarget parameter. In the
execution result of this command, the nickname value appears under An instance of
HostStorageDomain. Use this value to specify the domainnickname parameter.
Command execution example
hdvmcli AddWWNForHostStorageDomain
-o "D:\logs\AddWWNForHostStorageDomain.log"
"serialnum=10001" "model=XP1024" "port=1" "domain=1"
"wwn=22.33.44.55.44.55.44.33,11.33.22.33.44.33.22.22"
Command execution result
RESPONSE:
An instance of StorageArray
.
. (Attributes of StorageArray are omitted here)
.
List of 1 HostStorageDomain elements:
An instance of HostStorageDomain
objectID=*****
portID=1
portName=CL1-B
domainID=1
hostMode=Standard
displayName=CL1-B-1
domainType=0
nickname=HCMD0103
List of 2 WWN elements:
An instance of WWN
WWN=22.33.44.55.44.55.44.33
nickname=Jane
An instance of WWN
WWN=11.33.22.33.44.33.22.22
nickname=Jone
*****: The value is encoded by the CLI.
DeleteLun
DeleteLun deletes paths set from a host to a volume. If the LUN is secured, the corresponding WWN
is required.
Parameters
Table 77 DeleteLun command parameters
DescriptionStatusParameter name
Serial number of the path's storage systemRequired
serialnum
Command reference208