HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1.1 CLI Reference Guide (TB581-96066, September 2011)

DescriptionStatusParameter name
New nickname of the WWN
If you specify this parameter, you must also specify the domain
or nickname parameter.
If you specify this parameter, you must also specify the wwn or
wwnnickname parameter. You must specify the same number of
values for each parameter.
Optional
newwwnnickname
#
The topology and channelspeed parameters cannot be used when an FCoE connection is
used.
Parameter values to obtain in advance
serialnum and model: Obtain these values from the execution result of the GetStorageArray
command. In the execution result, use the arrayType value or the displayArrayType value to
specify the model parameter, and use the serialNumber value to specify the serialnum parameter.
port: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. Execute this command by specifying only the model and serialnum parameters, and
Port for the subtarget parameter. In the execution result of this command, the portID value
appears under An instance of Port. Use this portID value to specify the port parameter.
portname: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. In the execution result of this command, the displayName value appears under An
instance of Port. Use this value to specify the portname parameter.
domain: Obtain this value from the execution result of the GetStorageArray
(subtarget=HostStorageDomain) command. Execute this command by specifying only the model
and serialnum parameters, and HostStorageDomain for the subtarget parameter. In the
execution result of this command, the domainID value appears under An instance of
HostStorageDomain. Use this domainID value to specify the domain parameter.
nickname: Obtain this value from the execution result of the GetStorageArray (subtarget=Port)
command. Execute the GetStorageArray command with the model and serialnum parameters
specified and subtarget=Port and portsubinfo=HostStorageDomain specified, and then
specify the value of nickname that is displayed in the execution result as An instance of
HostStorageDomain.
wwnnickname: Obtain this value from the execution result of the GetStorageArray
(subtarget=HostStorageDomain, hsdsubinfo=WWN) command. Execute this command by
specifying only the model and serialnum parameters, and HostStorageDomain for the
subtarget parameter and WWN for the hsdsubinfo parameter. In the execution result of this
command, the nickname value appears under An instance of WWN. Use this value to specify
the wwnnickname parameter. The WWNs for this host storage domain are displayed in the List
of (nn) WWN elements, where nn indicates the number of WWNs. Select the target WWN from
this list, and use it to specify the wwnnickname parameter.
Command execution example
In this example, the ModifyPort command modifies the settings for a port (port number: 16) of a
storage system (serial number: 10001, model: XP1024) as follows. The command:
• changes the value for the hostmode parameter to Standard, for the port's host storage domain
(domain ID: 0)
Command reference184