HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 CLI Reference Guide (TB581-96051, May 2011)

ReplicationInfo instance
The ReplicationInfo instance is output when the following commands are executed:
• “AddReplication” on page 260
• “DeleteReplication” on page 272
• “GetHost” on page 223
• “GetStorageArray (subtarget=Pool) ” on page 149
• “GetStorageArray (subtarget=ReplicationInfo) ” on page 160
• “ModifyReplication” on page 277
Table 134 ReplicationInfo instance attributes
DescriptionAttribute
Object ID of ReplicationInfoobjectID
Name of the copy pair used by the RAID Manager
This item is output if it has been registered.
pairName
Serial number of the storage system containing the P-VOL
pvolSerialNumber
Type of the storage system containing the P-VOL
If the storage system containing the P-VOL is not registered, Unknown is output.
pvolArrayType
Device number of the P-VOL
pvolDevNum
P-VOL object ID
pvolObjectID
ID of the pool containing the P-VOL
For Continuous Access Journal Software, a journal group ID is output.
For Snapshot, or Continuous Access Asynchronous Software, the pool ID of a data
pool is output.
-1 is output for other copy types.
pvolPoolID
Serial number of the storage system containing the S-VOL
svolSerialNumber
Type of the storage system containing the S-VOL
If the storage system containing the S-VOL is not registered, Unknown is output.
svolArrayType
Device number of the S-VOL
svolDevNum
S-VOL object ID
svolObjectID
ID of the pool containing the S-VOL
For Continuous Access Journal Software, a journal group ID is output.
For Snapshot or Continuous Access Asynchronous Software, the pool ID of a data
pool is output.
-1 is output for other copy types.
svolPoolID
CLI Reference Guide 323