HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

Figure 6 System configuration of virtual machines supported by Device Manager
Environment settings on virtual machines
The prerequisite environment differs depending on the configuration of virtual machines, as follows:
• If an HBA is allocated for each virtual machine:
Install a Device Manager agent on each virtual machine to which you want to allocate volumes.
• If an HBA is shared by multiple virtual machines:
Install a Device Manager agent on any one of the virtual machines to which you want to allocate
volumes.
• If a virtual HBA is allocated to each virtual machine (if an NPIV HBA is used):
Install a Device Manager agent on all virtual machines to which you want to allocate volumes.
In addition, if you manage virtual machines on VMware ESX 4.x or VMware ESXi 4.x, install
VMware Tools on the virtual machines to be managed.
NOTE:
If a virtual machine is managed by both Host Data Collector and the Device Manager agent, the
Device Manager agent is given priority in displaying the acquired information in the GUI and CLI.
Device Manager settings
Configuration in which an HBA is assigned for each virtual machine
Register, as a normal host, each virtual machine to which you want to assign volumes. Do not register
the virtualization server that runs in the same physical environment in Device Manager.
Assign a volume path to each virtual machine (WWN). After assigning the paths, make the virtual
machines recognize the volumes as RAW devices.
Administrator Guide (Web Version) 35