HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

server.http.port
Specify the port number that the Device Manager agent's Web server uses.
Avoid specifying small port numbers because such numbers might conflict with other applications.
The normal range is 1024 to 49151. If a version of earlier than 5.8 is installed, specify 23011.
Note that if the host OS is Windows and you have changed the port, you must use the
firewall_setup command to specify the firewall exception settings again.
Default: 24042
server.http.host
Specify the host that executes the Device Manager agent's Web server.
Default: localhost
server.http.socket.agentAddress
Specify the IP address at which the Device Manager agent transmits notifications to the Device Manager
server. In order to limit the IP addresses notified to the Device Manager server from the Device Manager
agent, specify the IP address to be notified.
For operation in an IPv6 environment, specify a global address. If you specify a site-local address or
link-local address, the IPv4 address will be used.
It is necessary to match the IP address version to the one specified in
server.http.socket.bindAddress.
The IP address that you specified in this property can also be used when creating or editing the
configuration definition file. If is used with the Device Manager agent, make sure that communication
between instances is possible using the specified IP address.
Default: None
#
#: If no IP address is specified, the IP address acquired by the Device Manager agent will be used.
If there are multiple IP addresses, the first IP address acquired by the Device Manager agent via API
will be used.)
server.http.socket.bindAddress
In situations in which the Device Manager agent runs on a platform on which two or more network
interface cards (NICs) are installed, this property allows you to specify the NIC through which the
Device Manager agent can accept requests. If you want to restrict the interface to be accepted, specify
the IP address to be accepted with the Device Manager agent. For operation in an IPv6 environment,
specify a global address. If you specify a site-local address or link-local address, the default value
will be used.
It is necessary to match the IP address version to the one specified in
server.http.socket.agentAddress.
Default: None. (The Device Manager agent accepts all NIC requests.)
Administrator Guide (Web Version) 347