HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

Setting values when a volume manager is not used
The following table lists the recommended setting values when a volume manager is not used.
Table 73 Setting values when a volume manager is not used
server.util.
processTimeOut
(units: milliseconds)
server.http.
server.timeOut
(units: seconds)
server.http.
entity.maxLength
(units: bytes)
Number of LUs man-
aged by Device Man-
ager, and recognized
by the host
600,000
(Default value)
600
(Default value)
131,072 or more100
600,000600153,600 or more256
600,000600307,200 or more512
1,200,0001,200614,400 or more1,024
Setting values when a volume manager is used
Table 74 to Table 78 list, for each host OS, the general setting values when using a volume manager.
These tables also list the setting values when the execution of the HiScan command finishes within
an hour. Using a configuration where the number of LUs or logical volumes is more than the number
shown in the tables is not recommended: It will take more than one hour for the HiScan operation
to complete, and the operation might fail.
Table 74 Setting values when a volume manager is used (in Windows)
server.agent.
maxMemorySize
(units: MB)
server.util.
processTimeOut
(units: milliseconds)
server.http.
server.timeOut
(units: seconds)
server.
http.entity.
maxLength
(units:
bytes)
Number of LUs and logic-
al volumes managed by
Device Manager and re-
cognized by the host
64
600,000
(Default value)
600
(Default value)
230,000 or
more
88/10
64600,000600
750,000 or
more
88/20
128600,000600
12,000,000
or more
100/200
Operation and maintenance of the Device Manager agent210