HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.1 Administrator Guide (web) (TB581-96050, May 2011)

2. Use the javapath_setup command to switch the Java execution environment used on the
Device Manager agent.
3. Execute the hbsasrv command to restart the Device Manager agent service so that the change
takes effect.
4. After upgrading from version 7.0.1 or earlier, if you switched the Java execution environment
from the JRE bundled with the Device Manager agent to Oracle Sun JDK or Oracle Sun JRE,
change the firewall settings.
For details about how to change the firewall settings, see “When a firewall is
enabled” on page 204.
Changing the user of the Device Manager agent service
A LocalSystem account is established for the user who executes the Device Manager agent service.
After installing the Device Manager agent, you can change the user who has Administrator permissions
by completing the following steps.
To change the user who executes the Device Manager agent service:
1. Stop the Device Manager agent service.
2. Open the Services window by selecting Management Tools, and then Services.
3. Select HBsA Service, Operations, and then Properties.
The HBsA Service property window opens.
4. Click the Logon tab, and then select Account.
5. Set up the user and password, and then click OK.
6. From the Services window, select HBsA Service, and then start it.
Specifying settings when a host manages 100 or more LUs
If 100 or more LUs are managed by Device Manager and are recognized by a single host, the
following problems might occur:
• When the HiScan command is executed, the KAIC22009-E, KAIC22014-E, KAIC22019-E,
or KAIC22048-E error message is output, and the host information cannot be registered in the
Device Manager server.
• When performing operations such as refreshing the host, an OutOfMemory error occurs on the
host and the host stops responding.
To prevent these issues, change the values shown as the following table. Note that the values set for
these items differ depending on whether the host is using a volume manager.
Table 72 Items to set when several LUs are recognized by a host
DescriptionSetting item
Set the value for the server.http.entity.maxLength property in
the server.properties file of the Device Manager server.
The maximum length of data that
can be received by the Device
Manager server
Operation and maintenance of the Device Manager agent208