HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 CLI Reference Guide (TB581-96335, April 2013)

Value to be specified for the subinfo parameter and acquir-
able information
Specifiable
subinfo parameter
Value of the para-
meter subtarget
The following information about pools can be acquired:
• LDEV: LDEV information
• LogicalUnit: Logical unit information
• PairedPool: Information about the pool on the other side
of the copy pair (if a copy pair is set for the pool)
• PoolTier: Hardware tier information
• ReplicationInfo: Copy pair information
poolsubinfoPool
The following information about ports can be acquired:
• HostStorageDomain: Host storage domain information
• VPort: Virtual information about the ports
• WWN: WWN information
portsubinfoPort
This parameter is valid for the NAS configuration.
• IPAddress: IP address of the port controller
• PairedPortController: Information of the paired port
controller
controller-
subinfo
PortController
LogicalUnit: Information about logical units related to a copy
pair
replication-
subinfo
Replication-
Info
The following information about resource groups used for data
migration using virtual IDs can be acquired:
• VHostStorageDomain: Virtual information about host stor-
age domains
• VLDEV: Virtual information about LDEVs
• VPort: Virtual information about ports
vrpusubinfo
VResourceParti-
tionUnit
The following table shows examples of specifying the parameter subtarget and the subinfo
parameters.
Table 47 Examples of using the GetStorageArray command
Command specificationInformation to acquire
GetStorageArray subtarget=LDEV
LDEV information
GetStorageArray
subtarget=LogicalUnit
lusubinfo=Path
Information about paths for logical units
GetStorageArray subtarget=LDEV
ldevsubinfo=VolumeConnection
Mapping information of external volumes for LDEVs
GetStorageArray
subtarget=ArrayGroup
arraygroupsubinfo=LogicalUnit
lusubinfo=LDEV,Path
Information about logical units for parity groups and about
LDEVs and paths for those logical units
Command reference130