HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Administrator Guide (TB581-96334, April 2013)

hdc.adapter.adapterProcessNum
Specify the number of Adapter processes that can start on the same host.
Specifiable range: 1 to 10.
Default: 1
hdc.adapter.localport
Specify the port number on the Adapter process side that is used when the Service process and the
Adapter process communicate each other.
When you start multiple Adapter processes, specify the port numbers delimited by a comma (,). No
more than 10 port numbers can be specified. If the number of port numbers is more than the number
of Adapter processes to be started, only as many port numbers as Adapter processes to be started
are enabled.
Specifiable range: 1 to 65535.
Default: 22111,22112,22113,22114,22115,22116,22117,22118,22119,22120
Related topics:
• hdc.adapter.adapterProcessNum, page 397
hdc.common.rmi.registryPort
Specify the non-SSL communication port number of the RMI registry.
Specifiable range: 1 to 65535. This port is also used for internal communication by Host Data Collector.
Default: 22098
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.rmiregistry property of the Device Manager server (when
non-SSL communication is used by Host Data Collector and the Device Manager server).
Related topics:
• Registering an exception for the Host Data Collector Base service (for non-SSL communica-
tion), page 275
• hdc.rmiserver, page 375
• hdc.ssl.secure, page 400
hdc.common.rmi.serverPort
Specify the non-SSL communication port number of the RMI server.
Specifiable range: 1 to 65535.
Administrator Guide (Web Version) 397