HP P9000 Command View Advanced Edition Suite Software 7.4.0-00 CLI Reference Guide (TB581-96326, December 2012)

DescriptionStatusParameter name
Specific information about the path
The values you can specify are HostInfo and WWN. If you specify
multiple values at the same time, separate the values by commas.
Optional
pathsubinfo
Starting sequence number of paths for which information is to be
obtained
Specify this parameter when you want to obtain information for
a part of paths for a specific storage system.
When path information is ordered as shown below and numbered
from 0 upward, specify the first number in the sequence of paths
that you want to obtain.
Order of paths:
1. Port IDs in ascending order
2. Domain IDs in ascending order
3. Device numbers in ascending order
This parameter must be specified together with the
numOfElementsFilter, model, and serialnum parameters.
Optional
startElement-
NumFilter
Number of paths for which information is to be obtained
Specify this parameter when you want to obtain information for
a part of paths for a specific storage system. Specify the number
of paths for which information is to be obtained. This parameter
must be specified together with the startElementNumFilter,
model, and serialnum parameters.
The maximum recommended value is 16384.
Optional
numOfElements-
Filter
Port name of the storage system
Specify this parameter to acquire information about a particular
path. When you specify this parameter, you must also specify the
model and serialnum parameters, either the
domainnickname or domain parameter, and the devnum
parameter.
Do not specify this parameter together with the port parameter.
If they are specified at the same time, an error will occur.
Optional
portname
Port ID of the storage system
Specify this parameter to acquire information about a particular
path. When you specify this parameter, you must also specify the
model and serialnum parameters, either the
domainnickname or domain parameter, and the devnum
parameter.
Do not specify this parameter together with the portname
parameter. If they are specified at the same time, an error will
occur.
Optional
port
Command reference160