HP P9000 Command View Advanced Edition Suite Software 7.3.1-00 Administrator Guide (web)

The following table describes the firewall_setup command syntax.
Table 98 firewall_setup command syntax
DetailsItem
firewall_setup {-set|-unset}
Synopsis
Registers the following ports used by the Device Manager agent in a Windows environment
as firewall exceptions:
• Port set for the server.agent.port property (default: 24041/tcp)
• Port set for the server.http.port property (default: 24042/tcp)
• Port set for the server.http.localPort property (default: 24043/tcp)
This operation requires Administrator privileges. If the OS is Windows Server 2008 or Windows
Server 2008 R2, the command must be executed from a command prompt started as an
Administrator.
Note that this command cannot be used if the OS is Windows Server 2003 without any service
pack installed.
Description
-set
Adds firewall exceptions.
-unset
Removes firewall exceptions.
Options
hbsa_modinfo command
The hbsa_modinfo checks the available agent functions (add-on modules). The hbsa_modinfo
command is stored in the following locations:
In Windows:
installation-folder-for-Device-Manager-agent\bin\hbsa_modinfo.bat
In Solaris, Linux, or HP-UX:
/opt/HDVM/HBaseAgent/bin/hbsa_modinfo
In AIX:
/usr/HDVM/HBaseAgent/bin/hbsa_modinfo
The following table describes the hbsa_modinfo command syntax.
Table 99 hbsa_modinfo command syntax
DetailsItem
hbsa_modinfo [name-of-the-addon-module]
Synopsis
Using and maintaining the Device Manager agent246