HP P9000 Command View Advanced Edition Suite Software 7.2 CLI Reference Guide

• If more than one logical unit is specified, internal volumes and external volumes cannot be mixed
together.
• If more than one internal volume is specified, all of them must have the same drive type.
For external volumes, HP does not recommend that you use logical units with different drive types
for a pool for Thin Provisioning Software.
• If more than one logical unit is specified, all of their drives must have the same rotational speed.
NOTE:
• For details about the number of pool volumes that can be specified in a THP pool, see the Thin
Provisioning documentation.
• For details about the total maximum number of THP pools, see the Thin Provisioning documentation.
Format for P9500
hdvmcli [URL] AddPool [options]
model=model serialnum=serial-number
[poolid=pool-ID]
[threshold=THP-pool-threshold-1]
[threshold2=THP-pool-threshold-2]
[threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
devnums=device-number-of-logical-unit [tiercontrol={enable|disable}]
[automigration={enable|disable}] [migrationinterval={0|1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
Format for XP24000/XP20000
hdvmcli [URL] AddPool [options]
model=model serialnum=serial-number
[poolid=pool-ID]
[threshold=Thin-Provisioning-Software-pool-threshold-1]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
devnums=device-number-of-logical-unit
Parameters
Table 27 AddPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Command reference68