LSF Version 7.3 - Platform LSF Configuration Reference

Description
Enables Platform EGO to control LSF res and sbatchd. Set the value to "Y" if you want EGO
Service Controller to start res and sbatchd, and restart if they fail.
All hosts in the cluster must use the same value for this parameter (this means the value of
EGO_DAEMON_CONTROL in this file must be the same as the specification for
EGO_DAEMON_CONTROL in install.config).
To avoid conflicts, leave this parameter undefined if you use a script to start up LSF daemons.
Note:
If you specify EGO_ENABLE="N", this parameter is ignored.
Example
EGO_DAEMON_CONTROL="N"
Default
N (res and sbatchd are started manually)
ENABLE_EGO
Syntax
ENABLE_EGO="Y" | "N"
Description
Enables Platform EGO functionality in the LSF cluster.
ENABLE_EGO="Y" causes lsfinstall uncomment LSF_EGO_ENVDIR and sets
LSF_ENABLE_EGO="Y" in lsf.conf.
ENABLE_EGO="N" causes lsfinstall to comment out LSF_EGO_ENVDIR and sets
LSF_ENABLE_EGO="N" in lsf.conf.
Set the value to "N" if you do not want to take advantage of the following LSF features that
depend on EGO:
•
LSF daemon control by EGO Service Controller
•
EGO-enabled SLA scheduling
•
Platform Management Console (PMC)
•
LSF reporting
Default
Y (EGO is enabled in the LSF cluster)
EP_BACKUP
Syntax
EP_BACKUP="Y" | "N"
slave.config
548 Platform LSF Configuration Reference