LSF Version 7.3 - Platform LSF Configuration Reference

lsf.licensescheduler
The lsf.licensescheduler file contains Platform LSF License Scheduler configuration information. All sections
except ProjectGroup are required.
The command blparams displays configuration information from this file.
Changing lsf.licensescheduler configuration
After making any changes to lsf.licensescheduler, run the following commands:
•
bladmin reconfig to reconfigure bld
•
badmin mbdrestart to restart mbatchd
Contents
•
Parameters section
•
Clusters section
•
ServiceDomain section
•
Feature section
•
FeatureGroup section
•
ProjectGroup section
•
Projects section
•
Automatic time-based configuration
Parameters section
Description
Required. Defines License Scheduler configuration parameters.
Parameters section structure
The Parameters section begins and ends with the lines Begin Parameters and End
Parameters. Each subsequent line describes one configuration parameter. All parameters
are mandatory.
Begin Parameters
ADMIN=lsadmin
HOSTS=hostA hostB hostC
LMSTAT_PATH=/etc/flexlm/bin
LM_STAT_INTERVAL=30
PORT=9581
End Parameters
Parameters
•
ADMIN
•
AUTH
•
DISTRIBUTION_POLICY_VIOLATION_ACTION
•
ENABLE_INTERACTIVE
•
EXT_FILTER_PORT
•
FLX_LICENSE_FILE
•
HOSTS
lsf.licensescheduler
502 Platform LSF Configuration Reference