LSF Version 7.3 - Platform LSF Configuration Reference

See also
LSF_RES_DEBUG, LSF_CMD_LOGDIR, LSF_CMD_LOG_MASK, LSF_LOG_MASK,
LSF_LOGDIR
LSF_LIM_IGNORE_CHECKSUM
Syntax
LSF_LIM_IGNORE_CHECKSUM=y | Y
Description
Configure LSF_LIM_IGNORE_CHECKSUM=Y to ignore warning messages logged to lim
log files on non-master hosts.
When LSF_MASTER_LIST is set, lsadmin reconfig only restarts master candidate hosts
(for example, after adding or removing hosts from the cluster). This can cause superfluous
warning messages like the following to be logged in the lim log files for non-master hosts
because lim on these hosts are not restarted after configuration change:
Aug 26 13:47:35 2006 9746 4 7.0 xdr_loadvector: Sender <10.225.36.46:9999>
has a different configuration
Default
Not defined.
See also
LSF_MASTER_LIST
LSF_LIM_PORT, LSF_RES_PORT, LSB_MBD_PORT,
LSB_SBD_PORT
Syntax
LSF_LIM_PORT=port_number
Description
TCP service ports to use for communication with the LSF daemons.
If port parameters are not defined, LSF obtains the port numbers by looking up the LSF service
names in the /etc/services file or the NIS (UNIX). If it is not possible to modify the services
database, you can define these port parameters to set the port numbers.
EGO parameter
EGO_LIM_PORT
Default
On UNIX, the default is to get port numbers from the services database.
On Windows, these parameters are mandatory.
Default port number values are:
lsf.conf
470 Platform LSF Configuration Reference