LSF Version 7.3 - Platform LSF Configuration Reference

Default
0
LSF_HPC_NCPU_INCR_CYCLES
Syntax
LSF_HPC_NCPU_INCR_CYCLES=increment_cycles
Description
Minimum number of consecutive cycles where the number of CPUs changed does not exceed
LSF_HPC_NCPU_INCREMENT. LSF checks total usable CPUs every 2 minutes.
Default
1
LSF_HPC_NCPU_THRESHOLD
Syntax
LSF_HPC_NCPU_THRESHOLD=threshold
Description
The percentage of total usable CPUs in the LSF partition of a SLURM cluster.
Default
80
LSF_HPC_PJL_LOADENV_TIMEOUT
Syntax
LSF_HPC_PJL_LOADENV_TIMEOUT=time_seconds
Description
Timeout value in seconds for PJL to load or unload the environment. For example, set
LSF_HPC_PJL_LOADENV_TIMEOUT to the number of seconds needed for IBM POE to
load or unload adapter windows.
At job startup, the PJL times out if the first task fails to register with PAM within the specified
timeout value. At job shutdown, the PJL times out if it fails to exit after the last Taskstarter
termination report within the specified timeout value.
Default
LSF_HPC_PJL_LOADENV_TIMEOUT=300
lsf.conf
Platform LSF Configuration Reference 461