LSF Version 7.3 - Platform LSF Configuration Reference

LSF_ENABLE_EGO
Syntax
LSF_ENABLE_EGO="Y" | "N"
Description
Enables Platform EGO functionality in the LSF cluster.
If you set LSF_ENABLE_EGO="Y", you must set or uncomment LSF_EGO_ENVDIR in
lsf.conf.
If you set LSF_ENABLE_EGO="N" you must remove or comment out LSF_EGO_ENVDIR
in lsf.conf.
Set the value to "N" if you do not want to take advantage of the following LSF features that
depend on EGO:
•
LSF daemon control by EGO Service Controller
•
EGO-enabled SLA scheduling
•
Platform Management Console (PMC)
•
LSF reporting
Important:
After changing the value of LSF_ENABLE_EGO, you must shut
down and restart the cluster.
Default
Y (EGO is enabled in the LSF cluster)
LSF_ENABLE_EXTSCHEDULER
Syntax
LSF_ENABLE_EXTSCHEDULER=y | Y
Description
If set, enables mbatchd external scheduling for LSF HPC.
Default
Not defined
LSF_ENABLE_SUPPORT_IPV6
Syntax
LSF_ENABLE_SUPPORT_IPV6=y | Y
Description
If set, enables the use of IPv6 addresses in addition to IPv4.
lsf.conf
454 Platform LSF Configuration Reference