LSF Version 7.3 - Platform LSF Configuration Reference

Default
N. Processor binding is disabled.
LSF_CMD_LOGDIR
Syntax
LSF_CMD_LOGDIR=path
Description
The path to the log files used for debugging LSF commands.
This parameter can also be set from the command line.
Default
/tmp
See also
LSB_CMD_LOG_MASK, LSB_CMD_LOGDIR, LSB_DEBUG, LSB_DEBUG_CMD,
LSB_TIME_CMD, LSF_CMD_LOG_MASK, LSF_LOG_MASK, LSF_LOGDIR,
LSF_TIME_CMD
LSF_CMD_LOG_MASK
Syntax
LSF_CMD_LOG_MASK=log_level
Description
Specifies the logging level of error messages from LSF commands.
For example:
LSF_CMD_LOG_MASK=LOG_DEBUG
To specify the logging level of error messages, use LSB_CMD_LOG_MASK. To specify the
logging level of error messages for LSF daemons, use LSF_LOG_MASK.
LSF commands log error messages in different levels so that you can choose to log all messages,
or only log messages that are deemed critical. The level specified by LSF_CMD_LOG_MASK
determines which messages are recorded and which are discarded. All messages logged at the
specified level or higher are recorded, while lower level messages are discarded.
For debugging purposes, the level LOG_DEBUG contains the fewest number of debugging
messages and is used for basic debugging. The level LOG_DEBUG3 records all debugging
messages, and can cause log files to grow very large; it is not often used. Most debugging is
done at the level LOG_DEBUG2.
The commands log to the syslog facility unless LSF_CMD_LOGDIR is set.
Valid values
The log levels from highest to lowest are:
lsf.conf
440 Platform LSF Configuration Reference