LSF Version 7.3 - Platform LSF Configuration Reference

Time usage is logged in milliseconds; specify a positive integer.
Example: LSB_TIME_SCH=1
Default
Not defined
LSB_UTMP
Syntax
LSB_UTMP=y | Y
Description
If set, enables registration of user and account information for interactive batch jobs submitted
with bsub -Ip or bsub -Is. To disable utmp file registration, set LSB_UTMP to any value
other than y or Y; for example, LSB_UTMP=N.
LSF registers interactive batch jobs the job by adding a entries to the utmp file on the execution
host when the job starts. After the job finishes, LSF removes the entries for the job from the
utmp file.
Limitations
Registration of utmp file entries is supported on the following platforms:
•
SGI IRIX (6.4 and later)
•
Solaris (all versions)
•
HP-UX (all versions)
•
Linux (all versions)
utmp file registration is not supported in a MultiCluster environment.
Because interactive batch jobs submitted with bsub -I are not associated with a pseudo-
terminal, utmp file registration is not supported for these jobs.
Default
Not defined
LSF_AFS_CELLNAME
Syntax
LSF_AFS_CELLNAME=AFS_cell_name
Description
Must be defined to AFS cell name if the AFS file system is in use.
Example:
LSF_AFS_CELLNAME=cern.ch
Default
Not defined
lsf.conf
436 Platform LSF Configuration Reference