LSF Version 7.3 - Platform LSF Configuration Reference

Valid Values

Valid log classes are the same as for LSB_DEBUG_CMD except for the log class LC_ELIM,

which cannot be used with LSB_DEBUG_MBD. See LSB_DEBUG_CMD.

Default

Not defined

See also

LSB_CMD_LOG_MASK, LSB_CMD_LOGDIR, LSB_DEBUG, LSB_DEBUG_MBD,

LSB_DEBUG_NQS, LSB_DEBUG_SBD, LSB_DEBUG_SCH, LSF_DEBUG_LIM,

LSF_DEBUG_RES, LSF_LIM_PORT, LSF_RES_PORT, LSB_MBD_PORT,

LSB_SBD_PORT, LSF_LOGDIR, LSF_LIM_DEBUG, LSF_RES_DEBUG

LSB_DEBUG_NQS

Syntax

LSB_DEBUG_NQS=log_class

Description

Sets the log class for debugging the NQS interface.

Specifies the log class filtering to be applied to NQS. Only messages belonging to the specified

log class are recorded.

LSB_DEBUG_NQS sets the log class and is used in combination with LSF_LOG_MASK,

which sets the log level. For example:

LSF_LOG_MASK=LOG_DEBUG LSB_DEBUG_NQS="LC_TRACE LC_EXEC"

Debugging is turned on when you define both parameters.

To specify multiple log classes, use a space-separated list enclosed in quotation marks. For

example:

LSB_DEBUG_NQS="LC_TRACE LC_EXEC"

This parameter can also be defined from the command line.

Valid values

For a list of valid log classes, see LSB_DEBUG_CMD.

Default

Not defined