LSF Version 7.3 - Platform LSF Configuration Reference

Description
Specifies the logging level of error messages from LSF batch commands.
To specify the logging level of error messages for LSF commands, use
LSF_CMD_LOG_MASK. To specify the logging level of error messages for LSF daemons, use
LSF_LOG_MASK.
LSB_CMD_LOG_MASK sets the log level and is used in combination with
LSB_DEBUG_CMD, which sets the log class for LSF batch commands. For example:
LSB_CMD_LOG_MASK=LOG_DEBUG LSB_DEBUG_CMD="LC_TRACE LC_EXEC"
LSF commands log error messages in different levels so that you can choose to log all messages,
or only log messages that are deemed critical. The level specified by LSB_CMD_LOG_MASK
determines which messages are recorded and which are discarded. All messages logged at the
specified level or higher are recorded, while lower level messages are discarded.
For debugging purposes, the level LOG_DEBUG contains the fewest number of debugging
messages and is used for basic debugging. The level LOG_DEBUG3 records all debugging
messages, and can cause log files to grow very large; it is not often used. Most debugging is
done at the level LOG_DEBUG2.
The commands log to the syslog facility unless LSB_CMD_LOGDIR is set.
Valid values
The log levels from highest to lowest are:
•
LOG_EMERG
•
LOG_ALERT
•
LOG_CRIT
•
LOG_ERR
•
LOG_WARNING
•
LOG_NOTICE
•
LOG_INFO
•
LOG_DEBUG
•
LOG_DEBUG1
•
LOG_DEBUG2
•
LOG_DEBUG3
Default
LOG_WARNING
See also
LSB_CMD_LOGDIR, LSB_DEBUG, LSB_DEBUG_CMD, LSB_TIME_CMD,
LSF_CMD_LOGDIR, LSF_CMD_LOG_MASK, LSF_LOG_MASK, LSF_LOGDIR,
LSF_TIME_CMD
LSB_CMD_LOGDIR
Syntax
LSB_CMD_LOGDIR=path
lsf.conf
400 Platform LSF Configuration Reference