LSF Version 7.3 - Administering Platform LSF

Administering Platform LSF 715
Troubleshooting and Error Messages
LIM messages
The following messages are logged by the LIM:
main: LIM cannot run without licenses, exiting
The LSF software license key is not found or has expired. Check that FLEXlm is set
up correctly, or contact your LSF technical support.
main: Received request from unlicensed host <host>/<port>
LIM refuses to service requests from hosts that do not have licenses. Either your
LSF license has expired, or you have configured LSF on more hosts than your
license key allows.
initLicense: Trying to get license for LIM from source
<LSF_CONFDIR/license.dat>
getLicense: Can’t get software license for LIM from license file
<LSF_CONFDIR/license.dat>: feature not yet available.
Your LSF license is not yet valid. Check whether the system clock is correct.
findHostbyAddr/<proc>: Host <host>/<port> is unknown by <myhostname>
function: Gethostbyaddr_(<host>/<port>) failed: error
main: Request from unknown host <host>/<port>: error
function: Received request from non-LSF host <host>/<port>
The daemon does not recognize host. The request is not serviced. These messages
can occur if host was added to the configuration files, but not all the daemons have
been reconfigured to read the new information. If the problem still occurs after
reconfiguring all the daemons, check whether the host is a multi-addressed host.
See Host Naming on page 86 for information about working with multi-addressed
hosts.
rcvLoadVector: Sender (<host>/<port>) may have different config?
MasterRegister: Sender (host) may have different config?
LIM detected inconsistent configuration information with the sending LIM. Run
the following command so that all the LIMs have the same configuration
information.
lsadmin reconfig
Note any hosts that failed to be contacted.
rcvLoadVector: Got load from client-only host <host>/<port>. Kill
LIM on <host>/<port>
A LIM is running on a client host. Run the following command, or go to the client
host and kill the LIM daemon.
lsadmin limshutdown host
saveIndx: Unknown index name <name> from ELIM
LIM received an external load index name that is not defined in the lsf.shared
file. If name is defined in
lsf.shared, reconfigure the LIM. Otherwise, add name
to the
lsf.shared file and reconfigure all the LIMs.
saveIndx: ELIM over-riding value of index <name>